Cutting Edges |
Call For More Information: 1-888-507-9734 Need help with your Cutting Edge order? Click the link to open Cutting Edge Worksheet PDF. |
|
Square Edge Flat
|
|
• Generally used for mounted snow plow.
• May also be used for application specific base edges on excavators and loaders. • Usually made as bolt-on with holes in top or in the center (reversible). • Holes may be countersunk, round or square. • Material is often high carbon steel. |
|
Single Bevel Flat
|
|
• Commonly used as a weld on edge (welded to base of bucket).
• Can also be used as a base edge (made with / without holes to accommodate bolt-on edges, adapters or wear segments). • Can be custom drilled or cut. • Can be either heat treated steel for wear or weldable steel for base edges. |
|
Double Bevel Flat
|
|
• Generally meant as a bolt on wear edge for loaders, dozers, graders, scrapers, backhoes and excavators.
• Commonly supplied with bolt holes center drilled (except for graders) to allow the edge to be reversed after lead edge is worn. • Available without holes for custom weld-on applications. • Supplied in heat-treated or through-hardened steel. |
|
Half Arrow
|
|
• Either bolt-on or weld-on.
• Generally designed for loader bucket applications. Sometimes used as a replacement cutting edge for excavators. • Sold in bulk lengths or cut into segments (custom holes and lengths available). • Heat treated boron steel. |
|
Double Bevel Curved
|
|
• Primarily used in grader or plow applications.
• Generally supplied with square countersunk holes at the top of the blade. • Can be custom ordered with no holes or specialized holes. • Standard heat treated diamond steel (some smaller sizes made from high-carbon steel). |
|
Serrated
|
|
• Serrated (ice edges) can be made from single bevel or double bevel flat, or double
bevel curved material. • Serrations can be cut into either side of the edge or both sides (reversible). • Teeth are made with standard width and gap spacing (which depends on thickness and size of the edge). • Custom serrations can be cut to specification. |
|
Router Bit
|
|
• Designed to work on scrapers.
• They help move material into the center of the bowl and up the elevating conveyor. • Available in standard and heavy duty for most major OEM equipment. |
|
Hot Cupped End Bit
|
|
• Made exclusively for bulldozers.
• Designed in left hand and right hand configurations. • Digs deep into the surface material and helps move it to the center of the blade to ensure even material flow. • Available in many different thicknesses to suit your application (and most OEM bulldozers). |